samedi 14 décembre 2013

Washing Your Car Without Water



In these times of drought and strict regulations with water to wash the car , it has always been difficult for people to be able to maintain their vehicles with a conventional hose and bucket technique . For gear heads , this can be a difficult thing to deal with because we hate our cars there, all dirty and covered in dirt.

A waterless car wash - happiness, car care companies already have a product to solve this problem developed. They claim that you can safely and without scratching your entire vehicle paint and wash everything with a single drop of water.

Can we do this safely without scratching the paint ?

For this to work , you need a lot of microfiber towels , depending on vehicle size maybe 5-10 towels , especially if your car is filthy .

It has two towels on hand at all times , one to remove dirt and the other to dry the excess free water mixture. Start with the roof , spray a generous amount of wash solution without water on the surface and let it sit for a bit to loosen dirt . With his first microfiber towel , wipe in a straight line saturated part . Back and forth not to go, you just have to run it dirt. take your second microfiber cloth to clean the excess cleaner and dirt.

Want this procedure, a section at a time until finished. Do not forget to clean the wheels , without water spray cleaner on the wheels and then wipe with a separate cloth.

This works very well to remove dirt and grime of light in the car. I'm not too interested in this in a very dirty car as it runs the risk of scratching the paint , although manufacturers claim otherwise . With optimal washing rinse it not be a better choice for this.

It would be very hard to prevent scratches to the use of this product in a very dirty car can have a lot of dirt in the paint problem and scratches in the process, so be very careful when cleaning dirt.

Finally , you can use this for light to medium soiled vehicles. Still I have my doubts about using this at the height of the car very dirty because of the risk of painting. For gear heads can this be a problem with you. Let me know what you think.

Aucun commentaire:

Enregistrer un commentaire